Checkout
Lightweight single disc clutch assembly. A great combo for classes requiring stock appearing clutches. RAM Clutches for 'stock clutch rule' classes give you unmatched performance and durability. Our 10.5 inch diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM six paddle solid hub disc, this combination weighs in at just over 15 pounds. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set. RAM offers a lightweight 17 pound billet steel flywheel for Chevrolet that matches the above components. If you are required to use all steel components, RAM offers a similar 10.5 inch pressure plate with a nodular iron pressure ring. This unit uses the same heavier pressure spring for increased holding power. |
|---|
|
RAM 401 - 10.5 inch standard GM pressure plate
For classes requiring a steel cover and pressure ring, this 18 pound unit features 2800 pounds clamp load. 20 lbs Price: $175.99
|
|
RAM 434 - 10.5 inch standard Ford pressure plate
Mustang Pattern a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc Price: $179.95
|
|
RAM 1021 - 0.5 x 1 1/8-10 6 pad rigid disc
6 Pad 10.5" Clutch Disc, 1-1/8" - 10-Spline, Solid Hub, 3 lbs. Price: $193.95
|
|
RAM 1510 - Chevrolet pre-86 steel flywheel 153 tooth
Pre 1986 Chevrolet, 16 lbs. Price: $229.95
|
|
Price: $229.95
|
|
Price: $21.00
|
|
RAM 495 - Chevy Oval Track Throw Out Bearing
Release bearing - GM 1 3/4"L Price: $49.95
|
|
RAM 6951 - Old Style Riveted Disc
1 1/8 x 10 Spline Price: $87.99
|
|
Price: $39.95
|
|
Price: $6.95
|
|
|
|---|
RAM 78100 - Hydraulic Throwout Triple Disc
The 78100 is Designed to be used with RAM or other multiple disc clutches. The bearing base mounts to the front of the transmission using the provided bolts. RAM hydraulic bearings require a 3/4 or 7/8 inch master cylinder and the -4 AN connection line. .500" total travel. Price: $114.95
|
RAM 78125 - Hydraulic Throwout Single
The 78125 is designed for stock applications, kit car build ups, or circle track. The bearing is a floating design and installation is simple and quick. Optimal uses for this bearing are circle track cars utilizing stock style clutches, or any project car in which fitting mechanical linkage is not possible. The bearing requires a minimum 3/4 inch bore master cylinder and a -3AN feed line to run from the master to the bearing. A remote bleeder kit is available to make bleeding simple from outside the bellhousing. Price: $123.95
|
RAM 78505 - Hydraulic Bearing Replacement o-ring set
Replacement o-ring set for 78125 hydraulic bearings with a 2.250" housing diameter. Price: $15.95
|
6 1/4 inches of bulletproof performance. At just 11.9 pounds in the three disc version, the Assault Weapon is the toughest clutch in circle track racing. RAM's original design has stood the test of time for over 25 years. |
|---|
|
RAM 9951-3 - SBC Triple Bonded Clutch Disc 3-Pack
Assault Weapon 9351S Price: $229.95
|
|
RAM 9953 - Chevy Fine Spline Bonded Disc
Assault Weapon 9353S Price: $79.90
|
|
RAM 9953-3 - Bonded Clutch Disc 3-Pack
Assault Weapon 9353S Price: $239.95
|
|
RAM 9955-3 - Bonded Clutch Disc 3-Pack
Assault Weapon 9355S Price: $175.00
|
Click the  to add an item to your shopping Cart( you can always remove it later) |
Prices, specifications, and images are subject to change without notice. Some images are only a representation and might not be the actual product. 
Not responsible for typographical errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. |